BlueBird HB 50B servos

[Bunky.F.Knuckle]

25 minutes of flight time today, no overheating of the servo and it didnt fail. Didnt start with fully charged packs anyways, so no way to tell if I had an increase of amp draw. Plus, I had a wing servo come unplugged on the outboard right wing. Flowed it anyways!

 

[JAG]

I maiden my Carden Saturday with a 50b on the rudder. No issues, worked fine. I have to fix my CG issue and I'll get some more flights on it.

 

[49dimes]

Congrats on the maiden @JAG . I still have yet to get the two with problems off to BB but they go out in the mail soon. I am still very excited to get these brute's moving the surfaces of my bigger planes.

 

[Bunky.F.Knuckle]

Im gonna beat the crap out of this servo this weekend!

 

[Bunky.F.Knuckle]

3 flights today. Full throttle down wind KE, then to high rate into a loop. Never faltered.

Checked my 3600 packs after 2 flights, and was down to 75% capacity. Will report actual recharge capacity.

 

[Bunky.F.Knuckle]

Recharged 1200 mAh in. I think it was actually 4 flights I did yesterday, and another 3-4 today.

 

[Bunky.F.Knuckle]

If you are in the fence about these servos........ Jump off that fence and buy some! Now time for me to get some. For rudders, the 50B is the meow!

 

[Bunky.F.Knuckle]

3 more flights this morn! This servo comes down cool as a cucumber, too!

Put 1300mAh back in 2 each Glacier 3600 LiPo Rx packs, from yesterdays flying. I was MUCH harder with my flying yesterday and today.

 

[49dimes]

Finally got the 2 needing attention off to BB. Glad to hear they are running cool Chris! I found the MPX connectors (both styles) at HK and that's what these brutes will be getting "plugged in" with.

 

[Bunky.F.Knuckle]

Could have gotten the same plug at TailDraggerRC. And about 3 weeks sooner.