Welcome To GiantScaleNews.com

GSN is the BEST in an RC online community. Less corporate BS and more down home fun. Better conversations with REAL RC'ers. Don't settle for the biggest when you can have the best!
  1. If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale Bud Nosen 1/4 Scale Cub?

Discussion in 'Giant / Scale Scratch and Kit Build Threads' started by Stevendavis, Sep 19, 2020.

  1. Stevendavis

    Stevendavis 70cc twin V2

    Horizontal stab turned out well.
     

    Attached Files:

    pawnshopmike and dhal22 like this.
  2. Stevendavis

    Stevendavis 70cc twin V2

    What kind of hard points do you guys use for the tail brace wires?
     
  3. dhal22

    dhal22 GSN Sponsor Tier 1

    Hard maple. I still have several pieces of Thomas the Train track that I absconded when my kids got older. It is very nice maple.
     
    pawnshopmike and Stevendavis like this.
  4. Stevendavis

    Stevendavis 70cc twin V2

    Thanks! Do you just make plugs and insert them?
     
    dhal22 and WMcNabb like this.
  5. Center drilled oak dowel.
     
    Stevendavis and dhal22 like this.
  6. Stevendavis

    Stevendavis 70cc twin V2

    1/4" dowel?
     
  7. dhal22

    dhal22 GSN Sponsor Tier 1


    Yes or for classic pattern planes, etc, I use them for wing bolt receptacles.
     
    Stevendavis likes this.
  8. Stevendavis

    Stevendavis 70cc twin V2

    Thanks!
     
  9. Yes I've used 1/4" dowels, make them on the lathe. A few of the dowels end up junk as the small drill will follow the grain. Glue in with thin CA. I make them 1/2" long an cut off with flush cut saw after gluing.
     
    Stevendavis, dhal22 and WMcNabb like this.
  10. Stevendavis

    Stevendavis 70cc twin V2

    I'll give it a go!
     
Loading...

Share This Page