Extreme Flight 104 Extra 300

[balsa]

I just got one of these and a DA120 for my winter project. Can't wait till spring.

 

[camss69]

Here is my 104, I've had all the big EF planes and I like this one the best! Flew it today and the combo with the DA120 freekin rips! It helps that the weather was perfect today too..

 

[49dimes]

Here is my 104, I've had all the big EF planes and I like this one the best! Flew it today and the combo with the DA120 freekin rips! It helps that the weather was perfect today too..

I put the Falcon 29x9 and 4.5" spinner on too. Monster thrust! ( it looks like you got the falcon combo)

Your plane is Nice!

 

[camss69]

Thanks! Yeah, I'm really happy with the Falcon 29x9 and the Falcon spinner. I was flying it yesterday and the pullout and up-lines were so hard and fast I was laughing while I was flying. That ductwork you did on yours is amazing! I'm using the 3d printed baffles on mine and put a little spoiler (low pressure generator?) in front of the exit holes on the bottom of the cowl, not sure how much that helps with the cooling but it sure seems to run well. Hoping to head out again this Friday, the weather this week has been highs of 65 and 2mph winds, too perfect to not be flying.

 

[49dimes]

My 104 is set for Sunday after Thanksgiving. We will BBQ wings and Cheunecca Sausage and of course....Cheeseburgers.
Supposed to be mild sunny and low wind. Enjoy!

 

[Capt.Roll]

I'll be receiving my 104 next week. Can anyone tell me the width (inside) of the cowl?

 

[49dimes]

Just measured the outside... 12 and 1/4" at the cowl ring and just about the same at where both cylinders will be. Plenty of room! You thinking 150 or sumtin? the thickness of the glass is marginal. deduct 3/32"

 

[Capt.Roll]

No.........GP123

 

[49dimes]

It will get swallowed up fine!

 

[camss69]

My 104 is set for Sunday after Thanksgiving. We will BBQ wings and Cheunecca Sausage and of course....Cheeseburgers.
Supposed to be mild sunny and low wind. Enjoy!

Man, that sounds great!