Extreme Flight 104 Extra 300

[Capt.Roll]

Looking good. What did you use for the trimmed canopy strip to attach the screws

Well I'm kinda of waiting for @Terryscustom to finish up his "Splitting A Cowl" thread; I think this is the only thing he has to do. I'm thinking each side will need 4 to 5 screws. I have some 4-40 or 6-32 t-nuts but I will have to cut some small pieces of ply for each location so the t-nuts to have somthing to attach to. I'll then epoxy them in place along the interior of the glass lip.

 

[49dimes]

Just a suggestion ...The button head cap

hex screws look nice in black or stainless

 

[Capt.Roll]

Exactly Dimes. Great minds.........or is it corrupt minds.........think alike!........ha. Think I'm going to go with 6-32 size.

 

[mjg0808]

Exactly Dimes. Great minds.........or is it corrupt minds.........think alike!........ha. Think I'm going to go with 6-32 size.

View attachment 10978

While you guys are on the screw subject. I'm looking for new screws and bonded washers for the canopy. Would you guys know what size and where to order them from?


Sent from my iPhone using Tapatalk

 

[yakken]

Microfasteners

 

[Capt.Roll]

Another good source is trimcraftaviationrc.com

 

[mjg0808]

Thanks guys. Anyone know what size they are? I'll check them out.


Sent from my iPhone using Tapatalk

 

[Greg Alderman]

RTL Fasteners also...

http://www.rtlfasteners.com/

 

[AEROSHELDON]

This says they are 3MM....... should be right http://www.extremeflightrc.com/store/index.php?main_page=product_info&cPath=7_9&products_id=158

 

[mjg0808]

Thanks guys.
This place has them the cheapest. Not that they're terrible expensive.
Trimcraftavitionrc.com


Sent from my iPhone using Tapatalk