Discussion The I’m Going/Went Flying Thread

[AKNick]

Happy with the CG I think but I had cut the rates way back it was uncontrollable I am down from 100% to 40% and I can now fly it. One thing I did notice is you can’t cut the throttle it just stops flying having a hard time with that but just a matter of time I will get it.

Which power setup are you running? I'm running the old stock setup. make sure your ESC doesn't have a soft brake and is free wheeling. There's not a lot of mass to keep the prop spinning on these little guys so keeping the prop spinning is just part of the mental game.

 

[dhal22]

I need to get a yard flyer. Preferable bnf.

 

[pawnshopmike]

I need to get a yard flyer. Preferable bnf.

E-flite Eratix 3D FF (Flat Foamy) 860mm BNF Basic with AS3X and SAFE Select | Horizon Hobby

The Eratix 3D FF (Flat Foamy) 860mm BNF Basic with AS3X and SAFE Select by E-flite from our collection of the best Bind-N-Fly RC airplanes will help your dreams take flight. Find your next WOW at www.horizonhobby.com!

www.horizonhobby.com

 

[BalsaDust]

The PT40 trainer saw some flight time today. Enlarged control surfaces make a difference and it flew great.

 

[Stevendavis]

Very good!

 

[BalsaDust]

Was a bit breezy and chilly on Sunday but a couple buddies and I braved it for a few hours and had a good ole time.

 

[BalsaDust]

Let's just say I have found my new favorite plane. Absolutely awesome airframe.

 

[Snoopy1]

Let's just say I have found my new favorite plane. Absolutely awesome airframe.
View attachment 121107

Ok what is it.

 

[BalsaDust]

Ok what is it.

Extreme Flight 60" Extra NG. It's an absolute Beast after only 3 flights.

 

[dhal22]

E-flite Eratix 3D FF (Flat Foamy) 860mm BNF Basic with AS3X and SAFE Select | Horizon Hobby

The Eratix 3D FF (Flat Foamy) 860mm BNF Basic with AS3X and SAFE Select by E-flite from our collection of the best Bind-N-Fly RC airplanes will help your dreams take flight. Find your next WOW at www.horizonhobby.com!

www.horizonhobby.com