What is your setup on your 87?

[robj]

I'm going gas on this one. So far:
DA-60

What servos, boards(smart-fly?), battery(s), etc. I figure if you are going to copy someone, might as well be a quality setup.


Thanks,
Rob

 

[Park_Aviator]

http://www.3drcforums.com/showthread.php?81-87%94-3DHS-Extra-300-SHP-w-DA-60

http://www.GiantScaleNews.com/forums/showthread.php?t=73495

 

[robj]

Looking for Joe's setup....many of those bookmarked!!

 

[Ohio AV8TOR]

Don't forget the original post by Scott Stoops

 

[wamsy55]

The setup on the King 50 airplane I used:

Hs-7955's all around
Hs-5665 for throttle
Da-60
Spektrum power safe receiver
All running on HV
Spot-On servo arms

For a Futaba setup I just ran a battery sharing circuit.

 

[flylow3d]

The setup in my 87 for king 50 was:

DA60
Falcon 24x9 gas carbon
Harris smoke pump
Smartfly igntion cutoff and regulator
7955mg servos all around
Futaba 8 ch. receiver
Custom power expander/ battery share unit that dad and I built.

 

[wamsy55]

Another up for the 24 by 9, great prop for the DA-60.

 

[gyro]

The setup in my 87 for king 50 was:

DA60
Falcon 24x9 gas carbon
Harris smoke pump
Smartfly igntion cutoff and regulator
7955mg servos all around
Futaba 8 ch. receiver
Custom power expander/ battery share unit that dad and I built.

I'm thinking about getting a Harris pump for my 89 Slick. It's got a 32oz tank in it now... So I've got some weight to spare if I switch to 16oz.

 

[flylow3d]

I personally prefer the Sulivan Skywriter pump, mine quit working right before k50 so I threw the harris in my 87.

 

[gyro]

Ok, i'll look into that one, thanks for the advice.