Yippee! What the postman brought

[Snoopy1]

CNC Router cut.

What is diameter of the router. And all the notches have a radius in the bottom corners.

 

[BalsaDust]

What is diameter of the router. And all the notches have a radius in the bottom corners.

Yes all inside corners have to have a radius on them. He just told me on anything 1/4" or thinner that it needs a .031" radius and thicker than 1/4" needs a .063" radius. That leads me to believe that his smaller bit for thin stuff is .062" or 1/16" bit and his larger bit is .126" or 1/8" bit.

 

[dhal22]

Still looking for that Don’t Like button!

Wasn't too bad of a transaction, I bought the 110 with canisters as a package because the club asked me to reduce noise. I installed the MTW canisters on my 106 and never used the 110. I eventually sold it for what I paid for it less the canisters so free canisters was the end result.

Funny thing was the new buyer was looking around for canisters a couple of years later and found the ad that i replied to a couple of years prior. He emailed looking for why I didn't include the canisters with the sale. It doesn't work like that........

 

[dhal22]

A gallon of methanol for my Kavan 50 arrived today. Now to fire it up.

 

[Snoopy1]

A gallon of methanol for my Kavan 50 arrived today. Now to fire it up.

View attachment 108504

It never ran until it is on video.

 

[Jetpainter]

A pile of Hitec servos arrived last week for me 107" Pilot Decathlon.

 

[dhal22]

Looking around at angle blocks and wondered if cutting up a piece of angle iron would be cheaper. A few clicks and McMaster Carr put a 25 lb hunk of angle iron on my doorsteps. Gotta get an abrasive chop saw blade and give it a whirl.

 

[dhal22]

More silver solder for my Cub build.

 

[49dimes]

That's the "good stuff" .

 

[Snoopy1]

A pile of Hitec servos arrived last week for me 107" Pilot Decathlon.

View attachment 108538

Well you decided to go Hitec again did pro-modeled cross your mind.