• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Finished final sanding, started with 220, 320, and finished with 400. A light coat of hair spray was applied after each successive sanding.
  2. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Did a little work on the windshield plug today. Should be ready soon.
  3. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Thanks Nick but it is not my idea, something I read on the web but they do work great, very easy to align and pops right into place.
  4. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Welcome aboard Appowner. What parts are you looking for? The fiberglass part or windows or both? The fiberglass part is far from perfect and it will take a few prime and sand sessions. You can see in the photo the shinny and darker spots are low, I quickly block sanded to see just how it...
  5. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Thank you Steven. The first fairing is out of the mold, clean the mold and two coats of PVA and number will be on the way. One layer of 4 oz cloth and one layer of 8 oz. cloth. Mixed 6 grams of epoxy
  6. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Made a dash and covered it with vinyl fabric from Jo Ann fabrics, used 3m Super 77 contact cement to attach to the balsa dash. This will be glued it after the windows are installed. The vinyl is folded over on itself to form the lip and give a finished appearance.
  7. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    What glue did you decide to use for the fabric? Bought fabric for my dash top and while I ask the women what glue would work on the fabric, she recommended E6000, did a test with it and it does not work, I'm thinking 3M 77 contact cement.
  8. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    The mold is complete. It is far from perfect but good enough to get the job done.
  9. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Nice day in the burgh, working outside. Laid up the first side of fairing mold and removed the parting board, waiting for the PVA to dry to finish. Began finishing the side window plugs, put on several coats of shellac as a base. Really soaks in, continue to apply until it quit soaking in...
  10. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Worked on the mold for the main gear fairings. Have the plug mounted in the part board, 10 coats of wax and the first coat of PVA on. All the seams are sealed with Crayola modeling clay and the 2 marbles will locating domes. Will put another coat of PVA on before laying the first half, plan...
  11. TonyHallo

    Scale Nelitz 1/3 scale Cub build

    I second Steve thoughts. My dad taught me so much about life, I do miss him.
  12. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    The dash arrived today, looks good. I decided to go with a black panel rather the the gray/silver in the photo of the full scale. I am quite happy.
  13. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Was moving some things around in the shop to repair the heater for vacuum forming and found this fairing from the original Cherokee for the main gear. Need to make two, made a plug out balsa block, working this afternoon while cutting the lawn put on 2 layers of 8 ounce cloth, two coats of...
  14. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    The door is on the right side of airplane so the window is a little different. Radiused the corners, should have plenty of room to install the dash. The side window plugs are drying out, the windshield has a ways to go, on to sanding.
  15. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Installed 1/2" dowels drilled and counterbored for 4-40 socket head screws to hold the canopy on. The canopy is now mounted, now that this is completed the final filling and sanding will commence and the covering will begin. Opened the window opening on the left side and I plan to open the...
  16. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    All three plugs basking in the sun, it will take a few days to dry out. Mix a little over a quart per 4 pounds of plaster, a gallon and half in the windshield alone.
  17. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    The plug for the windshield took 24 pounds of plaster. Was hoping to be a little smaller but that is not the case. Put some foam inside to minimize plaster. The suggested mold release works great, the side window plugs just about fell out.
  18. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Thank you Rick. Put a coat of Rustoleum Stone Gray on the inside of the canopy. Same gray used on the Champ. Started making the plugs for the windows. The DAP website instructions suggest makin a mold release mixture of mineral spirits and petroleum jelly mixed to a watery consistency and...
  19. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Looks like it is sold in Canada, I get no search results on Amazon.
  20. TonyHallo

    Scale Wendell Hostetler 30% PA-28 Cherokee Build

    Never heard of it, might try it someday, I have a new bottle of 560 canopy glue. Thanks
Top