• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Search results

  1. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The Cub Hub arrived today however the adapter is drilled for a DA 100, TruTurn had little information on the Roto 85 engine, tomorrow I will send back the adapter along with the prop washer off the engine to get the correct adapter made.
  2. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Got the rear stringers complete along with the 1/32" plywood roof section. Made a jig from scrap wood to hold the dash at 19 degrees, the dash is clamped straight with a 3/4" aluminum angle, once the glue dries will install the remaining 3/8" stringer that connects the dash to the firewall.
  3. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    When I made the wing bows for the Champ, I soaked the 1/16" basswood strips in a PVC pipe capped and filled with cleaning ammonia overnight, the strips bent very easy, once dried they were then glued.
  4. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    I will interested in the resolution since I have one of these kits on the shelf. I will try to fit a cowl ring on the cowl when and if I build mine. Hope you find an easy and good solution, from what I recall the cowl looked nice in the box.
  5. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    RCM from 1991
  6. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Let's get it started!
  7. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Took the Champ to the club meeting last night, had the gear and wheels on, engine, cowl and prop installed but forgot to take a photo of it. Started installing the rear stringers. I did not cut the slots for the stringers before hand, this way the slots can be laid out in straight line, when I...
  8. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    I'm looking forward to making the struts as well. Got the 1/32" plywood installed, just finishing the door skins. The door will get covered with .012" aluminum sheet. The rear windows now have shape
  9. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    The streamline stainless tube arrived from Toni Clark. These along with the great photos posted by Bartman on Champ Citabrias, Decathlon forum are going to make some nice struts.
  10. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Yes it is nice to see scale lines, most of today's ARF's are nearly identical, change the cowl and wing platform and bam, you got a different airplane.
  11. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Got the interior completed after a Friday Fun night, hope to get a few flights in tomorrow morning and help a friend get his new plane sorted out. Then get the exterior sheeting on. Boy do I have a lot of scrap 1/32" ply for the scrap drawer. I hope to take the fuselage to our club meeting on...
  12. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Order 2' x 4" x 1/32" plywood from Aircraft Spruce, UPS delivered it yesterday. The interior and exterior get sheeted with 1/32" and I wanted the sheet to be one piece, started with a 18" x 21" piece for the interior. The exterior sheet also forms it the back windows. Have the door latch...
  13. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Well from the looks of it I would call it a success, nice.
  14. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    I use a quarter sheet palm sander with 220 paper, does the job for me.
  15. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    My good friend who's no longer with us would say "Expensive is cheap" how true.
  16. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Took advantage of the sale at Servo City, got 4 D945TW servos for the ailerons, rudder and elevator and 2 HS5496MH for the throttle and choke.
  17. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    I've read recently that some people tape the top of sheeting after gluing and wiping. I tried it and it works, not sure what it does but the people who posted it were well respected builders so I do it now.
  18. TonyHallo

    Scale 1/3 Scale Extra 330L Build.

    Looking good, you will run out parts to glue on soon!
  19. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Here's a photo I found online of the model, the side sheet and diagonal brace are not shown on the plans. This is really old school, the firewall is 3/4" thick, I suspect the fuel tank also offer some stability due to it's construction and the way it was installed. I think it is a 3 pound...
  20. TonyHallo

    Scale RCM 1/3 Scale Champ Build

    Agreed, I plan to sheet inside the sides with 1/8" lite ply, The dash and one stringer will be added to the top and evaluate. It is currently as designed which is hard to believe. The outside will get covered with .012" aluminum sheet attached with #0 screws. I hope to get the interior...
Top