Scale 1/3 Scale Extra 330L Build.

[Snoopy1]

Coming along nicely Snoop's but I swear I heard someone call me "CHEAP" in here .

Yes thanks a lot better than the first one. Just have to keep on it and it should be done soon. Then a can focus on the ailerons looking forward to that because it is something that I have never done. Making a set of ailerons out of foam. And with all the help I am getting is making it a lot easier.

 

[TonyHallo]

About 1 inch, just lay it between the core and sheeting, I would image that 1/8" would work as well.

 

[Snoopy1]

About 1 inch, just lay it between the core and sheeting, I would image that 1/8" would work as well.

Thanks for the reply, will most likely get into the ailerons tomorrow if I can finish of the sheeting on the wing.

 

[Snoopy1]

Well coming along nicely got all the sheeting on just have to do the end caps and the bevel for the aileron. Will do that tomorrow and some finishing sanding. Almost forgot the leading edge.

 

[Snoopy1]

Still working on the wing it always takes longer than you think or hope it will take, but it will be done today. Then it is on to the styrofoam ailerons. Thinking about the horns and the hard spots for the ailerons.

 

[49dimes]

Still working on the wing it always takes longer than you think or hope it will take, but it will be done today. Then it is on to the styrofoam ailerons. Thinking about the horns and the hard spots for the ailerons.

What type of horn do you plan to use? I really liked those that @Pistolera was using on his Extra.

 

[Snoopy1]

Hoping to use something like this after looking for a while I found these at JTEC. $9 a unit. Will need four of them.
Can think of something better or who else sells them

 

[49dimes]

Found these at https://skywardhobbies.com/t/hardware

You can choose between 30cc 50cc 100cc sizes.

 

[Snoopy1]

Found these at https://skywardhobbies.com/t/hardware

You can choose between 30cc 50cc 100cc sizes.

View attachment 109446

Thanks for the info need to buy some.

 

[Snoopy1]

Ok both wings are done just need to hinged and that will be done once the ailerons are built. But guess “what”put the two wings together on the supplied wing tube, wings slipped all the way down the tube and touched to two wings so at that I realized that the supplied wing tube is to short, because the fuselage still has to fit in between the two wings. So after doing some checking I cam to the realization that the wing tube is 6 1/2 short not happy.