• If you are new to GiantScaleNews.com, please register, introduce yourself, and make yourself at home.

    We're 1st in Giant Scale RC because we've got the best membership on the internet! Take a look around and don't forget to register to get all of the benefits of GSN membership!

    Welcome!

Scale Bud Nosen 1/4 Scale Cub?

Before I can get too serious with the getting after the door, I needed to finish up a few things. I added the upper fuse strips and got them all sanded down, as well as the forward fuse sheeting. I decided not to wet a large piece of 1/8" balsa sheet, and deal with all the cracking while trying to form it around the curves. I went with a shiplap style of covering forward fuse and it worked out good. I also used a denser grained balsa strips for more strength on this area, as there's no 1/4 x 1/4 stringers underneath.
 

Attachments

  • IMG_4707.JPG
    IMG_4707.JPG
    491 KB · Views: 148
  • IMG_4708.JPG
    IMG_4708.JPG
    486.9 KB · Views: 139
  • IMG_4711.JPG
    IMG_4711.JPG
    499.3 KB · Views: 116
  • IMG_4712.JPG
    IMG_4712.JPG
    430.2 KB · Views: 117
  • IMG_4718.JPG
    IMG_4718.JPG
    459.8 KB · Views: 137
Top