IMAC Dalton Extra 260 35%...Back at it!
- Thread starter Dooinit
- Start date
Terryscustom
640cc Uber Pimp
I second this suggestion. The two best options are to do everything possible to keep this seam from cracking.....or purposely make a small seam so when the joint moves it does not crack the paint and body work. Both ways look nice.
IMAC FANATIC
40% happier than most folks.
Subd'
Dooinit
70cc twin V2
I paint cars for a living, so I have access to all sorts of cool seam sealers. I was thinking about just running a bead and smoothing it out with some solvent and actually just using covering so it can't crack. I would hate to get it all painted up and have it crack. Seam sealer would stay flexible.
Terryscustom
640cc Uber Pimp
Another great idea, please document it if you do.....sounds interesting!
Dooinit
70cc twin V2
So after pondering this awhile, I decided to go a simple route. This is all trial and error for me. I used a clear automotive sealer(silicone) from the bottom. I ran a small bead and smoothed it out with my finger. Then I flipped over and made sure there wasn't a bunch on the top. I used a wax and grease remover on a glove and smoothed out the sealer making sure it wasn't higher than the seem. Tomorrow I will do some more thinking on how to finish the topside. I may be doing this "wrong", but its a fun process of learning!!
Terryscustom
640cc Uber Pimp
Nice tinted canopy too, BTW
Dooinit
70cc twin V2
Thanks. When I have it inside it looks a little dark imo. When I bring it outside it looks perfect!
Terryscustom
640cc Uber Pimp
Agree, setting so the final pics are about 400kb in size or 1000 pixels makes a huge difference. We will give you dancing chickens for bigger pictures
