djmoose
70cc twin V2
YUP! Some friends and I were thinking about pylon racing pattern planes!! It would be awesome!
gyro
GSN Contributor
Throw either the EF Silver Bullet F3A or the DM4330-282 on there, run it on 10s and an APC 14x14, I bet it'd win!
Last edited by a moderator:
Bigroger
70cc twin V2
Why not get both Luv3D?
Can never have enough airframes, even if you don't build them, having them in boxes stored is great insurance and supports the flying low situation as you have backups you can go with.
My airframes are starting to get to the pointy end of the stick in that I am happy with what I have flying and for now will start accumulating backup airframes over time to keep me supplied. As DA Aus doesn't carry spare airframe wood parts like EF does in the USA if the airframe gets baged up and can't be repaired easily its a new one from the box for me.
I broke the motor box off my 60" edge before Xmas in a dumb thumb take and roll to KE and looks like the only real damage was motor box and cowl.
But no spare parts for us Aussies so replaced the airframe and now I have spares ready to go from an almost intact minus motor box airframe.
Gotta get that MXS and Laser though, I reckon they are gonna rock!!
Can never have enough airframes, even if you don't build them, having them in boxes stored is great insurance and supports the flying low situation as you have backups you can go with.
My airframes are starting to get to the pointy end of the stick in that I am happy with what I have flying and for now will start accumulating backup airframes over time to keep me supplied. As DA Aus doesn't carry spare airframe wood parts like EF does in the USA if the airframe gets baged up and can't be repaired easily its a new one from the box for me.
I broke the motor box off my 60" edge before Xmas in a dumb thumb take and roll to KE and looks like the only real damage was motor box and cowl.
But no spare parts for us Aussies so replaced the airframe and now I have spares ready to go from an almost intact minus motor box airframe.
Gotta get that MXS and Laser though, I reckon they are gonna rock!!
gyro
GSN Contributor
Actually a good suggestion Roger... I'm thinking to get the 60" Laser, and keep it on standby until I am not flying the MXS or Edge I'm currently flying. I have a feeling they'll sell out quickly!
Last edited by a moderator:
Bigroger
70cc twin V2
That is what I was thinking, but over here DA doesn't seem to move the same volume of airframes as EF in USA does. But I like having spares.
Put 6 packs through the 60" extra today. Changed the Castle ICE100 over to Icelite 100A as I had it a tad nose heavy right on the wing tube. Had a blast.
Nobody at the club so I had the strip all to myself the whole time.
Really started tuning it in great.
I even took all the KE mixes out of the radio and at the better CG it doesn't need any KE mix at all.
They all fly so damn great.
Also love my 3DHS stuff as well, just too afraid to bang them up as they are very, very hard to replace these days.
Put 6 packs through the 60" extra today. Changed the Castle ICE100 over to Icelite 100A as I had it a tad nose heavy right on the wing tube. Had a blast.
Nobody at the club so I had the strip all to myself the whole time.
Really started tuning it in great.
I even took all the KE mixes out of the radio and at the better CG it doesn't need any KE mix at all.
They all fly so damn great.
Also love my 3DHS stuff as well, just too afraid to bang them up as they are very, very hard to replace these days.
gyro
GSN Contributor
Just think how much you'll be able to fly on a day like that with a gasser!