Scale Nelitz 1/3 scale Cub build

[dhal22]

More aileron pulley work. Impatiently waiting on a shoulder bolt from McMaster Carr I found this little nylon thingy. I cut it down and came up with this.

 

[dhal22]

Tack glued. Height definitely waiting on @TonyHallo pulley cover mold. Design open for discussion.

 

[TonyHallo]

The package was delivered on 2/21/23 at 3:42 pm?

 

[dhal22]

I'll check with my office manager.

 

[dhal22]

The package was delivered on 2/21/23 at 3:42 pm?

Delivered. Thank you Tony. Now, how do I use it?

 

[dhal22]

Ordered some shoulder bolts from McMaster Carr, too heavy. I should have thought about nylon, which they had. Much lighter. However, the threaded wood inserts are military grade heavy and way too heavy. I think my cheap plastic bolt kit from the hardware store is my best option.

 

[dhal22]

Here was the idea.

 

[AKNick]

I like the nylon bolts too. Curious to see how the pull-pull system geometry does. Hopefully the wires remain taught. Otherwise, you may consider a little cable retainer so it doesn't de-rail. Your setup is going to look great! Fingers crossed mr. ackermann doesn't have to provide engineering here.

 

[BalsaDust]

Interesting. Never knew they made plastic shoulder bolts

 

[dhal22]

Interesting. Never knew they made plastic shoulder bolts

I didn't either. Just typed it in and there they were.