110" TIMBER Assembly Thread

[FlyingClint]

@Snoopy1 you can buy the XT-90S that have the spark resistor built in.
View attachment 114866
@FlyingClint thanks for the measurements I really only need two.
View attachment 114865
Here is the 3mm T-Nuts from micro fasteners. Sooooo much more robust.
View attachment 114864

ok, @AKNick I think these are the measurements you needed...

 

[AKNick]

ok, @AKNick I think these are the measurements you needed...

View attachment 114882 View attachment 114883

So very close! The second pic needs the little piece that the tailwheel sits under. My design has a gap I fit the OEM bracket into.
For some reason I am having a hard time converting tenths of an inch into mm's, The scale on that caliper has me trippin.

 

[FlyingClint]

So very close! The second pic needs the little piece that the tailwheel sits under. My design has a gap I fit the OEM bracket into.
For some reason I am having a hard time converting tenths of an inch into mm's, The scale on that caliper has me trippin.

Dang it, ok, I was SO CLOSE! ha! Alright, let me get that last one again after I finish editing videos here for our church services...

 

[FlyingClint]

ok, @AKNick here are the measurements of that last part you needed.

 

[Snoopy1]

Sorry I know everyone is going to be mad at me but the inch system sucks. It just so much easier in mm. Looking at that calliper with 1/64 is just difficult.

 

[acerc]

Sorry I know everyone is going to be mad at me but the inch system sucks. It just so much easier in mm. Looking at that calliper with 1/64 is just difficult.

I agree completely, and a dial indicator sucks just as bad versus digital.

 

[BalsaDust]

I love a good dial indicator but the 1/64 would drive me crazy. as far as the inch system over the metric I agree the metric system is probably better but after many years in construction SAE is just burned into my brain and it hard sometimes to look at other things.

 

[dhal22]

Sorry I know everyone is going to be mad at me but the inch system sucks. It just so much easier in mm. Looking at that calliper with 1/64 is just difficult.

There are 2 types of countries. Those that use the metric system and those that have been to the moon............

 

[FlyingClint]

Sorry I know everyone is going to be mad at me but the inch system sucks. It just so much easier in mm. Looking at that calliper with 1/64 is just difficult.

I agree, but there is the measurements in MM on there as well.

 

[AKNick]

There are 2 types of countries. Those that use the metric system and those that have been to the moon............

You got me thinkin.... USA went to the moon in 1969-1972... US Metric conversion act to SI was 1975... soooooooooooooo

Instead of me complaining, I looked up the instruction manual for that caliper. well attempting to download it anyways....
https://www.generaltools.com/produc.../manuals/pdf/142-Instructions_EFS_GT_2011.pdf