rcguy1958
50cc
I started a thread on the 55" yak here :
http://www.3drcforums.com/showthrea...arbon-fiber-Hybrid-Yak-54-coming-from-Skywing
http://www.3drcforums.com/showthrea...arbon-fiber-Hybrid-Yak-54-coming-from-Skywing
yea it better be made tuff.
the toughness is not what I question. It's the flying quality on 6s power. I've done this setup before on a 3dhs 58" Edge. It wasn't a good setup. IMO!!
Not sure I follow? You're saying 6s on a 58" Edge was NOT good?
Not a good setup.
I found the 4s setup more suitable than the 6s setup. CG was difficult to achieve,, to much power. And yes IMO, there is such thing as to much power. Ran threw to many batteries running in series. It cuts your amount of flights in half compared to the amount of batteries you have. Flight times are shorter. Other people might say differently, but the plane didn't perform the way that I had hoped.
I found the 4s setup more suitable than the 6s setup. CG was difficult to achieve,, to much power. And yes IMO, there is such thing as to much power. Ran threw to many batteries running in series. It cuts your amount of flights in half compared to the amount of batteries you have. Flight times are shorter. Other people might say differently, but the plane didn't perform the way that I had hoped.
I found the 4s setup more suitable than the 6s setup. CG was difficult to achieve,, to much power. And yes IMO, there is such thing as to much power. Ran threw to many batteries running in series. It cuts your amount of flights in half compared to the amount of batteries you have. Flight times are shorter. Other people might say differently, but the plane didn't perform the way that I had hoped.
Wow I'm really surprised to hear this. I've got 2x3s3000 packs in my 58" Edge and I've got the batteries taped together, so I always "see them" as one pack. I'm also surprised to hear that your flight times were shorter; I'm enjoying 5-7 minutes of operation on my setup.